Digilux 2 et Camera Info

fredo84
    Digilux 2 et Camera Info
Messages : 39
Depuis le 2 déc 2011
PARIS
Quelqu'un pourrait m'expliquer comment on accède à ce menu sur un Digilux2 :



Malgré mes recherches, je n'y arrive pas....
Merci et bonne et heureuse année 2012 à toutes et tous.
Melius mori quam foedari.
fredo84
Messages : 39
Depuis le 2 déc 2011
PARIS
J'ai trouvé....

"Here are the steps for finding out the actual shutter counts on a Digilux 2

1a. Insert a fully charged battery.
1b. Insert a SD card and take a few picutres.
1c. Turn the camera "Off."

2. Set the mode dial to "Single picture".

3. Simultaneously; press the "Flash" button (the small button on the right top of the camera)
and "Up" on the cross key: Turn the power "On" while you hold these two down.

4. Simultaneously; press the "Flash", "Menu" and "Left" on the cross key. This will bring you to an error code memory screen.

5. Simultaneously; press "Flash", "Menu" and "Left" again. This will bring you an overview on the screen showing:
VER 1.0B : 001D (or similar Firmware version).
NO.: S010XXXXXXXXXX (a 12-digit number with a "S" prefix, most likely a motherboard serial number).
PWRCNT: XXXX (the number of times the camera has been turned on, "Power On Count").
SHTCNT: XXXX (the number of times shutter fired, "Shutter Count").
STBCNT: XXX (the number of times flash fired, "Strobe Count").

6. Turn "Off" the power."

Donc, ça donne le nombre de fois où l'appareil a été mis sous tension, de déclenchements et d'eclairs du flash.
Melius mori quam foedari.
graveline
Messages : 91
Depuis le 11 déc 2010
paris
C'est un copié collé d'un forum américain, je présume?
fredo84
Messages : 39
Depuis le 2 déc 2011
PARIS
Nan...j'avais vu cette photo sur l'annonce ebay d'un américain qui vendait un Digilux 2; je lui ai simplement demandé comment on faisait...et il m'a répondu le texte que j'ai reproduit.
Melius mori quam foedari.

Retourner vers Compacts

Qui est en ligne

Utilisateurs parcourant cette section : Aucun utilisateur enregistré et 4 invités